What Are Hammer Drills Used For

What is a hammer drill? And when should yous use a hammer drill? It is important we accept an agreement of what makes the hammer drill unlike from a regular drill. Hither is a transcript from the handy guys Paul and Brian. The handy guys do a fair bit of arguing, just it is quite informative and entertaining. They really lay out the benefits of a hammer drill and where it can best be used.

The guys make it very clear - a hammer drill is for drilling masonry. It is as elementary as that.

Check out the handy guys video here:

All right, so permit's talk about hammer drills and Brian, I do not take a hammer drill, For the longest time I used a standard drill, I recall I have one back here. Here we go. This is a newer version of this hammer drill. A drill that's non a hammer drill, right?

Regular one-time drill and people use information technology for driving screws also as drilling holes.

Information technology'southward a very handy drill to have. This is a lightweight new Makita drill. I love it. Just you lot, when you need a hammer drill, you need a hammer drill, a hammer drill for Paul. Well, we'll talk about that. Well, let's talk about it now. Talk about you utilize it for, I use it for getting screws in areas where you lot need a hammering action. I mean what I need to drill holes for screws in an expanse where you lot need that hammering action like masonary concrete'southward a mess,

A hammer drill, or the hammering activity on a drill is used for drilling holes in masonry. Naught else.

So does information technology actually hammer the, the a chip into the surface?

That'southward right. So there, at that place'due south, there's two actions going on. Obviously y'all accept the rotary action of the drill, just then a dorsum and along movement as well. That helps that drill penetrate into masonry products, concrete rock, things similar that.

Now when you use a hammer drill though, information technology's non only important that to have the hammering action, which past the way, yous can turn on and off and you're going to evidence that, merely y'all have to utilise a particular kind of fleck.

That's right. Yous take to utilise a masonry bit and so that otherwise you're just going to ruin your bit almost instantly. Yes, exactly. So don't use an expensive wood bit. You desire to make sure you use a masonry chip, correct?

And then a lot of different drills have options. Then this particular cordless one has a hammer setting, a normal drill setting, and a commuter setting for if you're going to use screws with it. Now, Brian,

if information technology has all those settings, why wouldn't you merely buy a hammer drill? Because yous can do everything. You lot can use information technology for screws, you can apply it for standard non hammering action and hammering action. Well, yous're non going to purchase a hammer drill to drill normal holes in forest or in metallic. Why not? You're going to ruin your bit. Information technology'due south not what it'due south designed, right? But if you lot turn off the hammering action, why couldn't y'all do that? Well, absolutely. So you turn it off to hammering activity with a drill like this and now it's used for wood or metallic. That could be your drill to practice everything. This could be your drill to do everything, but in that location's ane problem. What's the problem, Paul? These things are huge and heavy, right? If y'all're simply not as heavy as another ones. And then if you have a little tiny drill chip and you lot're trying to put in a footling spiral, this would exist way overkill, right?

It would be, but this is when y'all want something that's when yous want something small. But this i here, this has a drill and a hammer selection. Okay as well. But information technology has a tail, right? So this is, this is a plug information technology in. You plug this in. So that'south why I don't like them. Brian, when I offset heard about hammer drills, I'g thinking why don't I just get a hammer drill? Merely they're heavier, bigger, they're awkward, they're smashing for what they do. But for near around the firm projects you merely don't demand, yous don't desire something this big. Even your co, your cordless one and this model, if you have to drill a hole in masonary whatsoever impairment. So let's talk about the certain features of these hammer drills that are possibly a piffling flake different. You mentioned the switch for hammering a than to hammer action.

Non hammer. Normally they accept a little picture of a hammer similar this one does. Yous have obviously Ford in opposite. That's if you're using it every bit a driver for screws. And we have a, we have a couple models here. These are all mitt shocks. In other words, y'all take the flake on and off with just a hand. You don't need a keyed Chuck. Like in the old days yous ever had to continue Chuck on these things. A little cardinal. Some of them nevertheless sell that way and in that location'due south pros and cons to that system. So, uh, for one thing information technology's harder sometimes to get the flake out if this thing is jammed really tight and you don't have that key to give you a leverage, it can exist hard to get this, you know, I've handed this a few times to y'all because I could non get the scrap out of it, right?

It can exist a problem and sometimes they can also come up loose. I've had pretty good results with this particular Chuck. It all depends on what Chuck the manufacturer puts on, right? The big ane hither has a proprietary Chuck and it takes a special kind of a bit, but this is going to do, uh, not simply, um, what is a hammer drill, but also can be used for chipping and, and other types of $.25 too. So this is really more often than not used past commercial, uh, vendors, contractors, and it, similar yous said, you lot tin can't just employ a typical bit like you'd apply on about, right household drills.

You got to get the manufacturers bit for this. It has a different kind of end on information technology, the neck, and it merely fits this so you can't even get those bits to fit, know the smaller bits to fit this model. But these are used by high end applications, electricians and other things where y'all really need to get large holes put through concrete walls. That'southward correct. So obviously that's going to go a lot faster than.

Perhaps the cordless with the hammer drill. Just my favorite characteristic is not having a defended hammer drill, simply having the i with the 3 different options. So driving normal drill and hammer drill, but never apply the hammer drill for driving screws. People get that dislocated with an impact commuter and touch driver has a like sort of a hammering action, but instead of hammering forward hammers rotationally for driving screws more than efficiently

So it actually gets a grip into a screw. It'southward what you hear when you take to become, you know, become new tires motorcar place. You hear those hammer drills become on and they make that loud. I hateful the impact, the impact driver. Now I'chiliad getting them reverse. Yous hear them and they brand that loud dissonance. But there, that's to get a better grip on the nut.

And the hammer drill is not really great for putting in screws or for drilling holes, for drilling holes in Masonry. Okay. Allow's the last affair I want to talk virtually Brian, what'southward that way dorsum in the old days of the handy guys podcast? Do you know where I'm going? Refresh my, 3 or four years agone we did a trivial test. We had a garage time, we chosen it and it was audio merely, correct? We apply photographs on our website, but there'due south an quondam post where nosotros had a fiddling contest between, I believe it was this model right here, your cordless hammer drill from Makita, which is an awesome tool. And now it'southward several years old, right? So information technology'due south really holding up. Nosotros've, we've, nosotros've used that a lot. And my, uh, Makita, aforementioned make, right? Right. Uh, much a little flake cheaper and uh, information technology's a corded model. Okay. Then what practice we have tales comes with tails, right? And nosotros found that this model hither, if I think correctly, because information technology's powered, had a much quicker and faster rotational speed. And for our application, our exam, which was drilling holes into a concrete floor, this was did it much faster,

That beat that in our little test. I'm not sure nosotros e'er posted. What is a hammer drill.

Yes, we did. It's out there, I believe, linked to it. Then, um, so the lesser line is typically speaking, not ever, and it's changing, especially with some of these higher terminate tools. A ability tool that's plugged in is going to requite you more than power and work better. But of course you're burdened by having to make certain you accept a power source. That's right. And then in that location you take information technology. Those are hammer drills. This is a quick selection of the diverseness y'all can become. Go along in mind the Chuck we talked virtually that. Make sure you become i with a good solid chuck. Uh, you tin replace the chucks. By the fashion, if you accept problems with them, they're replaceable. So, um, you know, look for a good quality hammer drill. And if y'all demand to put a pigsty in a difficult masonry surface, don't effort to use a standard drill like this. Get yourself a hammer drill and you'll be happy to. Yep, thanks for checking out the Handyguys podcast.

Filed under: what is a hammer drill